문자 보내
제품 소개기계적인 초음파 세탁기술자

Knob 15L PCB Auto Parts 360W Industrial Ultrasonic Cleaner

인증
중국 Skymen Technology Corporation Limited 인증
중국 Skymen Technology Corporation Limited 인증
고객 검토
나는 초음파 세탁기술자가 당신에 의하여 좋은 품질에게 하고 있다 행복한, 처음 것 아주 좋습니다입니다.

—— Stefan (독일)

우수한 기계. 나는 모두에게 추천한 비행사 초음파 세탁기술자 할 수 있습니다 전문가 또는 취미를 위해 필요로 하는.

—— Blasko Krstev

체계는 아주 잘 호평을 받는 시험해서 및 일이었습니다. 나는 당신의 도움을 전부 평가합니다. 미래 사업 wth가 있는을 위해 다시 앞으로 보기 당신.

—— Haytham Tarhini (사우디 아라비아)

제가 지금 온라인 채팅 해요

Knob 15L PCB Auto Parts 360W Industrial Ultrasonic Cleaner

Knob 15L PCB Auto Parts 360W Industrial Ultrasonic Cleaner
Knob 15L PCB Auto Parts 360W Industrial Ultrasonic Cleaner

큰 이미지 :  Knob 15L PCB Auto Parts 360W Industrial Ultrasonic Cleaner

제품 상세 정보:
원래 장소: 중국
브랜드 이름: Skymen
인증: CE ROHS FCC SGS
모델 번호: JP-060
결제 및 배송 조건:
최소 주문 수량: 1개 단위
가격: Negotiation
포장 세부 사항: 통 당 1 유닛
배달 시간: 주식에서
공급 능력: 달 당 8000 PC

Knob 15L PCB Auto Parts 360W Industrial Ultrasonic Cleaner

설명
모형: JP-060 수용량: 15L
탱크 크기: 330*300*150mm 단위 크기: 400*350*280mm
Paking 크기: 465*410*360mm 변환합니다: 6pcs
초음파 힘: 360W 타이머: 조정할 수 있는 0-30 분
빈도: 40kHz 물자: SU 304
G.W: 10.3kg 전력 공급: AC 110V ; AC 220V
난방 힘: 300W
하이 라이트:

360W Ultrasonic Parts Cleaner

,

Auto Parts Pcb Ultrasonic Cleaner

Mechanical Knob Ultrasonic Cleaner Ultrasonic Surgical Instrument Cleaning Bath

 

Features:

  • More convenient for operation
  • Stainless steel tank has resistance to wear and long work life.
  • Tank capacity: 15L
  • With Stainless steel basket
  • Use just tab water, or industrial  solvent cleaner for more higher cleaning requirement
  • Industrial control chip microcontroller.flexible circuit boards control, more secure & stable

JP-060 product specification:

 

Ultrasonic frequency 40,000Hz
Material of tank SUS304
Material of shell SUS304
Capacity 15L
Timer 0~30 mins
Heater 300W
Power supply type 1 AC 100~120V, 50/60Hz
Power supply type 2 AC 220~240V, 50/60Hz
Ultrasonic power 360W
Tank inner dimension 330*300*150mm
Unit dimension 400*350*280mm
Inner Packing size 465*410*360mm
Transducers 6pcs
N.W. 9.1kg
G.W. 10.3kg
Certificate ISO9001:2008 & CE & RoHS

 

 

 

 

 

How to Use an Ultrasonic Cleaner for Medical & Surgical Instruments


Medical and surgical instruments in a variety of sizes and complexity can pose challenges when it comes to cleaning, disinfecting and sterilizing them after use. An ultrasonic cleaner is an ideal tool for the first step in this three step process to protect medical personnel and patients from possible infection due to pathogens that remain on the instruments after a procedure.

 

 

Suggested Ultrasonic Cleaning Procedure

In all cases manufacturers’ instructions should be followed when using an ultrasonic cleaning process. These are representative steps.

Fill the ultrasonic cleaning tank with an approved medical instrument cleaning solution such as CLN-LR012 available from Tovatech following dilution instructions provided. Turn the cleaner on to start the degassing process. This step removes entrained air in new solutions that interferes with the efficiency of cavitation and takes approximately 10 minutes.

In the meantime:

  • Segregate instruments by alloy or composition to avoid potential damage (Chromium plated instruments should not be cleaned ultrasonically)
  • Instruments with movable parts should be disassembled to facilitate cleaning
  • Place the instruments the ultrasonic cleaner’s mesh basket, taking care that they do not come in contact with each other
  • Cannulated or lumened instruments should be positioned to insure interiors are wetted with the cleaning solution. In some instances placing them on an angle will facilitate this
  • Set the control panel per manufacturers’ instructions and start the cleaning process

At the end of the cycle, remove the instruments from the ultrasonic cleaning bath and thoroughly rinse them to remove all traces of the cleaning solution. Deionized water rinses will avoid spotting. If the instruments are not to be immediately disinfected and sterilized be certain that they are thoroughly dried and protected. Part reassembly can occur after sterilization.

Procedures should be in place to guide the replacement of used ultrasonic cleaning solutions. In some instances it is recommended that solution be drained and tanks thoroughly cleaned and dried after each ultrasonic cleaning cycle. Most solutions available today are biodegradable, which facilitates disposal but local authorities should be consulted on proper practices.


The ultrasonic cleaner uses ultrasonic waves (vibration) using water with detergents or enzymatic products to break up soil and organic material on medical instruments/devices. These devices are rinsed then autoclaved (sterilized). The autoclave sterilizer uses heat, steam, and pressure to kill all pathogenic microorganisms and their spores.

 

Package Includes:
1 x Digital Ultrasonic Cleaner
1 x Cleaning Basket
1 x Manual

 

Knob 15L PCB Auto Parts 360W Industrial Ultrasonic Cleaner 0

 

 

 

 

 

연락처 세부 사항
Skymen Technology Corporation Limited

담당자: Miss. Nikki

전화 번호: 86-755-27094405

팩스: 86-755-27094405

회사에 직접 문의 보내기 (0 / 3000)